Cylinder Mounted Chlorinator

These SM-117 Cylinder Mounted Chlorinators are sturdy and easy to operate an maintain. These consists of vacuum regulator, rotameter flow control valve, Yoke clamp to connect directly on cylinder, a gas fitter, a injector assembly vent and vacuum tubing of 5 meters. These chlorinators are widely accepted and are very efficient and economical. 

Principle of Operation

• Water Under pressure passes through injector cause vacuum, which open spring loaded diaphragm check valve. Vacuum passes through vacuum tubing to the chlorinator
  
• When cylinder/Tonner valve open chlorine passes through self aligned yoke gas filter where foreign particles are removed if present, chlorine gas passes to regulator where the cylinder pressure is controlled by the inlet valve assembly
• When vacuums adjusted by control valve vacuum opened the inlet valve with the help of diaphragm assembly and allowed chlorine gas to passes through flow meter where flow can be adjusted an to injector & point of application.
• If any break in the vacuum line occur the system automatically shut off the chlorine gas supply.

• Totally non corrosive materials are used in chlorinator such as UHMWHDPE, PTFE (PTFE), monal, PVC, Borosilicate Glass, Hastelloy "C", PVDF, VITON etc.